Pinout 7404

July 04, 2024 Post a Comment

Pinout 7404

IC 7404: The 7404 is a high-speed CMOS Logic Quad NOT Gate. The 7404 is also known as Hex inverter. The contains Six independent NOT gates in one package. The NOT gate consists of only one input and one output.

What are input pins in 7404 IC?

Pin Number	Description
1	A Input Gate 1
2	Y Output Gate 1
3	A Input Gate 2
4	Y Output Gate 2

How many pins are there in IC 7404?

Logic IC, Inverter, Hex, 1 Inputs, 14 Pins, DIP, 7404.

What kind of IC is the 7404?

7404 is a Hex Inverter NOT gate IC. It consists of six inverters which perform logical invert action. output of an inverter is complement of its input logic state i.e. when input is high its output is low and vice versa. device contains six independent gates each of which performs logic INVERT function.

How many not gates are in 7404 chip?

Each 7404 NOT gate IC has 6 NOT gates arranged as shown in the following figure. 14th pin is the Vcc and the 7th pin is the Ground. The outputs directly interface to CMOS, NMOS and TTL. It supports wide operating conditions and has large operating voltage range.

What does 74LS00 mean?

The 74LS00 is a TTL (Transistor to Transistor Logic) that uses low-power Shottky transistors to reduce the stored charge and get higher switching speeds than with conventional bipolar transistors. 74LS00 is a 14 pin IC that has four NAND gates each NAND gate has two inputs & one output.

What is pin configuration of IC?

By convention, the pins on an IC are numbered counterclockwise, starting with the upper-left pin closest to the clocking mark. So, for example, with the clocking notch orienting the chip at the 12 o'clock position, the pins of a 14-pin IC are numbered 1 through 7 down the left side and 8 through 14 up the right side.

WHAT IS AND gate IC number?

IC No.	Gate
7404	NOT
7408	AND
7432	OR
7486	EX-OR

What does 74 mean in IC?

Two digits, where "74" denotes a commercial temperature range device and "54" denotes a military temperature range. Historically, "64" denoted a short-lived series with an intermediate "industrial" temperature range.

How many volts should to supplied to a 7404 IC?

The 7404 should be fed a minimum voltage of 4.5V and a maximum voltage of 5.5V.

What IC is 7411?

74LS11 (or 7411) IC – Triple 3-Input AND Gate IC (7411 IC)

Which IC is used for or gate?

Functional name	Function	Pin numbers
4075	Triple 3-Input Positive OR Gate	14
4078	8-Input Positive OR/NOR Gate	14
4094	8-Stage Shift-and-Store Bus Register	16
4245	Dual Supply Octal Bus Transceiver3-state	24

How many inverters are contained in the 7404 TTL IC?

Product details. These devices contain six independent inverters.

What is ic7408?

7408 IC is a QUAD 2-Input AND GATES and contains four independent gates each of which performs the logic AND function.

What is the function of IC 7486?

7486 is Quad 2-Input EXOR Gate 14 Pin IC. It is an advanced high speed CMOS 2−input Exclusive−OR gate fabricated with silicon gate CMOS technology. It achieves high speed operation similar to equivalent Bipolar Schottky TTL while maintaining CMOS low power dissipation.

Which IC is used for XNOR gate?

XNOR gates are represented in most TTL and CMOS IC families. The standard 4000 series CMOS IC is the 4077, and the TTL IC is the 74266 (although an open-collector implementation).

What is the TTL IC for not Gates?

Gate circuits constructed of resistors, diodes and bipolar transistors as illustrated in this section are called TTL. TTL is an acronym standing for Transistor-to-Transistor Logic. There are other design methodologies used in gate circuits, some which use field-effect transistors rather than bipolar transistors.

How many pins does a XOR gate have?

Pin Number	Pin Name	Description
7	Ground	Connect to the ground of the circuit.
4,5	Input pin (2)	Input pins of Gate -2

What is the difference between 7400 and 74LS00?

The 74LS00 family improves technically on the 7400 family in two key areas: faster speed and lower power consumption. The only limitation of the 74LS00 family compared to the 7400 family is that the 74LS00 family can only source half as much current.

What is the difference between IC 74LS04 and IC 74HC04?

III 74LS04 VS. 74HC04 is a hex inverter of CMOS circuit, and the working voltage is 2V-6V. Both 74LS04 and 74HC04 are inverters, but LS stands for low-power Schottky and HC is high-speed COMS. LS is slightly faster than HC. LS adopts TTL level.